 |
Pine
T&G
Sizes Available: 4x8 up to 8x24
Featuring an
unfinished Eastern White Pine, these panels have
1x8 pine decking glued and stapled to the OSB
that has been laminated to an EPS core. This
look is clean and smooth and, once finished,
quite attractive.
|
|
|
| Pine/Cedar/Fir T1-11
Sizes Available: 4x8, 4x10 (Fir only)
For the
more rough sawn look, these panels are made
with T1-11 laminated to one side with OSB on
the other. They are available with grooves
on 4” or 8” centers and come with
a lap joint to hide all seams along the 8’ side. |
 |
|
Drywall Panels
Sizes Available: 4x8 up to 4x16
Sometimes referred to as “curtainwall” panels,
these will have 1/2” drywall laminated to one side of the EPS with
OSB laminated to the other. They are designed to span purlins or rafters
on 4’ centers so all joints will be hidden. They are most commonly
used as roof panels. |
 |
|
| Nailbase Panels
Sizes Available: 4x8
These panels can be made
with OSB or CDX plywood laminated to EPS on
one side only. They are nonstructural panels
placed over decking already attached to your
timber structure. |
 |
|
Pre-stained Pine T&G
Sizes Available: 4x8 up to 8x24
To save even more time on site,
these panels can be ordered with a pre-stained White Pine or Cedar
with 1x6 or 1x8 planks. The decking has been glued and stapled
to the OSB laminated to the EPS core. |
Western Red Cedar - Prefinished
|
|
Click here to view finished Log & Timber Frame homes |
FischerSIPS®, LLC
1800 Northwestern Pkwy
- Louisville, Kentucky 40203
Phone: (800) 792-SIPS (7477)
Fax: (502) 778-0508
E-Mail: sales@fischersips.com
Copyright © 2008, FISCHERSIPS®
Web Service by Hatch Creative, LLC |
